Reoflex 1K Structural Coating Black (Fine Grain), 750 ml

One-component enamel RX P-07 with a structural additive is intended for painting the surface of bumpers, external moldings, side mirror elements and other plastic parts, characterized by short drying time, excellent adhesion to plastic surfaces (except for Polyethylene PE), good elasticity, resistance to chipping and cracking, ease of use.
Substrates and surface preparation
ABS, fiberglass - degrease, treat with P500 abrasive or gray matting cloth, degrease.
Polypropylene and its modifications - degrease, apply plastic primer RX P-05.

It is recommended to apply in 2 salts, using a spray gun with a 1.4-1.6 mm nozzle and a pressure of 2.0-4.0 bar.
Interlayer interval - 10 minutes. Coating thickness - 40-60 microns.
Apply at a temperature of 10-30C and relative humidity up to 75%.
Drying: Air drying at 20C - 2 hours.