New
Brand:
DUR
Out of stock
0₸
Delivery is made the next day after ordering, except weekends
Pickup today, free
Pickup today, free
Description: - Two-component leveling primer with a high dry residue content. - Has high insulating properties, is easy to sand, does not shrink. - When adding plasticizer D101, can be applied directly to pre-prepared plastic.
Technical characteristics: - color: light gray - density: 1.6 g/cm3 - VOC: 510 g/l - shelf life: 24 months
Surface preparation: - degrease the surface with silicone remover D123 - sand old paintwork, steel, aluminum, putty with abrasive material P240 - degrease with silicone remover D123 - before applying to bare metal areas, cover with reactive primer CF D345
Mixing proportions: - primer D541: hardener D222: thinner D110 = 100:25:25
The life time of the finished mixture: - 1 hour at 20°C
Viscosity of the finished mixture: - 25 sec at 20°C
Spray gun: - 1.6-1.8 mm 2 bar at the inlet - number of layers: 3 - coating thickness: 150 microns
Interlayer holding: - 7 min at 20°C - holding before drying at 60°C and IR drying: 15 min
Drying: - at 20°C: 4 hours - at
Technical characteristics: - color: light gray - density: 1.6 g/cm3 - VOC: 510 g/l - shelf life: 24 months
Surface preparation: - degrease the surface with silicone remover D123 - sand old paintwork, steel, aluminum, putty with abrasive material P240 - degrease with silicone remover D123 - before applying to bare metal areas, cover with reactive primer CF D345
Mixing proportions: - primer D541: hardener D222: thinner D110 = 100:25:25
The life time of the finished mixture: - 1 hour at 20°C
Viscosity of the finished mixture: - 25 sec at 20°C
Spray gun: - 1.6-1.8 mm 2 bar at the inlet - number of layers: 3 - coating thickness: 150 microns
Interlayer holding: - 7 min at 20°C - holding before drying at 60°C and IR drying: 15 min
Drying: - at 20°C: 4 hours - at
Reviews: 0
There are no reviews for this product.
Questions: 0
No questions about this product.